Fluid Dispensing Valves and Nozzles

PV-10 Piezo Jetting Valve

PV-10 Piezo Jetting Valve

The PV-10 micro dispensing piezo jetting valve is intended for low to high viscous liquids. Also well suitable for chemical and pharmaceutical agents, glue or adhesives with fillers.

  • Minimum dispense diameter: .25mm (250µm)
  • Heated Valve, Maximum viscosity: 0-1M CPS
  • Max. Working Frequency: 1000Hz

Jet-8600 Pnuematic Jetting Valve

Jet-8600 Pnuematic Jetting Valve

Patented technology. Non-contact dispensing of various liquid types: Underfill, UV adhesive, solder paste, silicon, epoxy, conformal coating, surface mount adhesive, etc.

  • Maximum dispensing speed: 200 dots/second
  • Minimum dispense diameter: .35mm (350µm)
  • Heated Valve, Maximum viscosity: 0-300,000 CPS
  • Max. Working Frequency: 280Hz

Jet-9200 Pnuematic Jetting Valve

Jet-9200 Pnuematic Jetting Valve

The Jet-9200 Pneumatic Jetting Valve is a non-contact dispense valve capable of jetting fluid viscosities to 300,000 Cps. It delivers a fast jetting action producing up to 300 precise dots per second.

  • Minimum dispensing speed: 300 dots per second
  • Minimum dispense diameter: .40mm (400µm)
  • Heated Valve, Maximum viscosity: 0-300,000 CPS
  • Max. Working Frequency: 200Hz

E-01 Electromagnetic Jetting Valve

E-01 Electromagnetic Jetting Valve

Electromagnetically driven, non-contact jetting and dispensing. Low Impact, long life span, highly accurate, high speed, and low maintenance. Suitable for low viscosity dispensing such as underfill, UV adhesive, flux, and grease.

  • Min. Dot diameter: .4mm (400µm)
  • Min. Line width: 0.5mm
  • Viscosity range: 200-3000 CPS (Heated Valve)
  • Max. Working Frequency: 200Hz
  • Valve Temperature: ambient ~ 80˚C
  • Needle inner diameter: 0.1-0.8mm

Jet-16 Pnuematic Jetting Valve

Jet-16 Pnuematic Jetting Valve

Non-contact jetting. Compact Size, long life, high accuracy, high speed, easy to maintain. Suitable for fluid & paste dotting, dispensing, underfill, UV adhesive, SMT Adhesive, and grease.

  • Viscosity range: 200 – 200,000 CPS (Heated Valve)
  • Min. Dot diameter: 0 .4mm
  • Min. Line width: 0.5mm
  • Max. Working Frequency: 200HZ
  • Nozzle Temperature: ambient ~ 80˚C
  • Needle inner diameter: 0.1-0.8mm

TDS-10 Axial Slider Valve

TDS-10 Axial Slider Valve

Compact size, long life, no residual pressure, and low maintenance. Suitable for paste or similar dispensing, coating, and pouring. Dispense material with metal particles as solder paste or phosphor powder with precise dispensing results.

  • Viscosity range: 20-300K CPS (Heated Valve)
  • Min.dot diameter: 0.3mm
  • Min. line width: 0.2mm
  • Max. Working Frequency: 100HZ
  • Nozzle Temperature: ambient ~ 80˚C
  • Needle inner diameter: 0.1-1mm

TDS-25 Radial Slider Valve

TDS-20 Radial Slider Valve

Compact size, long life, no residual pressure, and low maintenance. Suitable for paste or similar dispensing, coating, and pouring. Dispense material with metal particles as solder paste or phosphor powder with precise dispensing results.

  • Viscosity range: 50K-1M CPS (Heated Valve)
  • Min.dot diameter: 0.2mm
  • Min. line width: 0.2mm
  • Max. Working Frequency: 10HZ
  • Nozzle Temperature: ambient ~ 80˚C
  • Needle inner diameter: 0.1-1mm

TDS-40 Radial Slider Valve

TDS-40 Electromagnetic Dispense Valve

Air-Driven, compact size , long life span, non-residual pressure, and easy maintenance. Suitable for paste or similar dispensing, coating, and pouring. e.g.: surface mount adhesive, UV adhesive, silicone, etc

  • Viscosity Range: 2K-300K CPS (Heated Valve)
  • Min. dot diameter: 0.3mm
  • Min. line width: 0.2mm
  • Max. Working Frequency: 1OOHz
  • Nozzle Temperature variable: ambient ~ 80˚C
  • Needle Inter diameter: 0.1-1mm
  • Double-electromagnetic valve

LG-02 Electromagnetic Screw Valve

LG-02 Electromagnetic Screw Valve

Optimizes dispensing accuracy by optimizing screw pitch to suit liquids of 2K-400K viscosity, such as: surface mount adhesive, silver paste, UV adhesive, silicon, epoxy glue, and conformal coating.

  • Viscosity range: 2-400K CPS (Heated Valve)
  • Minimum dispense space: 1.2mm
  • Minimum line width: 1mm
  • Minimum dispensing diameter: 1.5mm